The specific steps for repairing a western toilet will depend on the problem you're experiencing. Here are some common toilet problems and their potential solutions:

1. Toilet won't flush: If the toilet won't flush, check the water level in the tank. If the water level is too low, adjust the float valve to raise the water level. If the water level is fine, check the flush lever and chain to make sure they are properly connected and functioning.

2. Toilet is constantly running: If the toilet is constantly running, check the flapper valve in the bottom of the tank. Make sure it is seated properly and isn't damaged. If the flapper is fine, check the float valve to make sure it isn't stuck.

3. Toilet is leaking water: If you notice water on the floor around the toilet, check the bolts that hold the toilet to the floor. Tighten them if they are loose. If the bolts are tight, check the wax ring seal between the toilet and the floor. If the wax ring is damaged, it will need to be replaced.

4. Toilet is clogged: If the toilet is clogged, use a plunger to try to unclog it. If the plunger doesn't work, try using a plumbing snake to clear the blockage.

5. Toilet bowl is not filling: If the bowl isn't filling with water, check the water level in the tank. If the water level is fine, check the inlet holes around the rim of the bowl to make sure they are not blocked. If they are blocked, use a wire hanger or toothbrush to clean them out.

Remember, if you're not comfortable with plumbing work, it may be best to hire a professional plumber from Locals4u to diagnose and repair your toilet.