To remove a drainage pipe blockage, you can follow these general steps:

1. Locate the blockage. This may involve using a flashlight to look inside the drain or using a plumbing snake or auger to probe the drain and feel for the blockage.
2. Clear the blockage. Depending on the type and severity of the blockage, there are several methods you can try:

• Plunger: Use a plunger to create suction and force the blockage through the drain.
• Plumbing snake or auger: Insert the snake or auger into the drain and rotate it to break up the blockage or pull it out.
• Chemical drain cleaner: Pour a commercial drain cleaner into the drain and wait for it to dissolve the blockage.
• Boiling water: Pour boiling water down the drain to dissolve grease or other substances that may be causing the blockage.

1. Test the drain to make sure it is flowing freely. Turn on the water and check for any signs of slow drainage or backup.

It is important to take appropriate safety precautions when attempting to remove a drainage pipe blockage, such as wearing gloves and eye protection. If you are unsure about any aspect of the process, it may be best to hire a professional from Locals4u for assistance. Additionally, if the blockage persists or is particularly severe, it may require professional assistance to fully clear the blockage.